2007-2018 Jeep Wrangler JK Unlimited, Rubicon, Sahara – 2.5″ Front & 2″ Rear Lift Kit #601012

Description

This Kit Fits:
2007-2018 Jeep JK Wrangler X 2 door

2007-2018 Jeep JK Wrangler Sport 2 door

2007-2018 Jeep JK Wrangler Sahara 2 door

2007-2018 Jeep JK Wrangler Rubicon 2 door

2008-2018 Jeep JK Wrangler Unlimited X 4 door

2007-2018 Jeep JK Wrangler Sport 4 door

2007-2018 Jeep JK Wrangler Unlimited Sahara 4 door

2007-2018 Jeep JK Wrangler Unlimited Rubicon 4 door

This Truxxx 2.5″ front and 2.0″ rear ALL STEEL ( yes 100% real steel, not rubber or plastic or wood like some other kits on the market) lift for all versions of the Jeep JK is easy to install and has NO CHANGE in OEM ride quality. We use OEM springs because we like the way the JK drives, we like it’s qualities as a daily driver and we like that the axles, driveshafts, cv’s, steering are all designed to work with the OEM springs…we just need more ground clearance for our weekend adventures and we thought you might too so we made this kit to work for your daily driver and weekend adventure rig. Ground clearance is increased over stock and allows for up to 35” tall tires for street use and a 33.5” tall tire for off road use. All of our Jeep lift kits are a direct bolt in, 100% Made with USA and Canadian Mill Certified Steel and laser cut to precision tolerances using OEM drawings. We powder coat every part to make sure the finish lasts as long as your Jeep does!

This is a simple, easy to install design that will require no permanent modifications to your vehicle and the ride quality remains the same as stock. Each kit contains two front spring mounts, two rear spring mounts plus all hardware needed and full color instructions. Recommended installation time is approx 3 hours + alignment and a 32.5” tall tire for off road use and up to a 32” tall tire for on road use is commonly with a stock style offset wheel.

• Designed to retain the stock ride quality! • Aftermarket shocks are NOT required! • Alignment specs included! •