2017-2022 Kia Sportage & 2016-2021 Hyundai Tucson – 2.0″ Front and 2.25″ Rear Lift Kit with Shock Shaft Extensions #304036

Description

This Kit Fits:
2017-2022 Kia Sportage 2wd & 4×4 – all models

2016-2021 Hyundai Tucson 2wd & 4×4 – all models

This kit will lift the rear of the vehicle ¼” higher than the front so combined with the stock rake your rear should be approx. 1” taller than the front (most new vehicles are ¾” taller in the rear)

This kit has been designed specifically for the Sportage and the Tucson …but check your model years!

***FYI you are not alone we have had everyone wanting more height, common questions were always “can I get 3”, “can I get 4”… sorry, the answer is no!!***

We have been doing this for a long time (we built our first unibody lift in 2005) and while we would LOVE to make it taller, our original design was 2.5” and it was just too much – we didn’t like the angles and how it drove, while some people would be fine with it, we design every part we make to keep your vehicle driving and operating like stock; and we do our best to make sure parts do not wear out any faster than they would without our kit installed. 

This kit will increase your front ground clearance and keep that air dam and bumper out of the mud or sand on those trips to the cabin or the beach.

This kit has been tested with full throttle, wheels sliding and basically…well doing things you should never do to a new vehicle…we DO NOT recommend beating on your vehicle, you will break parts :-}

We also include the shock shaft extension so the self leveling shock will still work as stock.

This is a straightforward install (we include some very important simple install tricks in the instructions – make sure to read them!) No cutting or welding or permanent modifications needed. 

This lift kit allows you to fit much more aggressive tires and wheels allowing your Sportage/Tucson to take the family and all your toys to where they need to go! 

Made from US and Canadian Mill steel this kit will take everything you can dish out and more – we use 8.8 or better fasteners and design the kit to work with all the stock components. 

We fit 265/60R18 tires on aftermarket wheels. 

***ALWAYS test fit wheels and tires AFTER lift install***