2013-2024 Ram 3500/4500/5500 Dually/Cab n Chassis ~ 2.25″ Front and 2″ Rear Lift #605047-B

Description

This Kit Fits:

2013-2024 Ram 3500 4WD Dually/Cab n Chassis
2013-2024 Ram 4500 4WD Dually/Cab n Chassis

2013-2024 Ram 5500 4WD Dually/Cab n Chassis

OK, so you have a Ram 3500/4500/5500 dually or cab n chassis….you need to fit super singles or some 35″ sized rubber on it so you can get to the jobsite, the field where you keep the horses, the inside of the racetrack to unload your race car or even when you are just doing something like towing the 30′ 5th wheel with your toys in it or taking your home away from home to the beach or the lake….

If you have a dually Dodge, we have a way to give you some more height to fit the bigger tires you need to make sure you have proper ground clearance. I mean, you have a “proper” truck, why not finish it in a way to make the men and women at the factory proud; make them happy to see you “adding” some personal touch to make it work exactly to what you need from something “Ram Tough” :-}

We make this kit for ALL chassis that have the shock “INSIDE” the front spring, the rear u-bolts are 3/4″ ( unsure? it is the u-bolts that have the nuts facing down towards the ground) and this kit comes with a 2″ rear block.

 Make sure your truck is as follows:

~ Front shock inside the spring

~ Rear u-bolts are 3/4″ and the nuts are below the axle facing the ground

** if this is not your truck, no problem, if you have the shock “behind the spring” and your ubolts go around the axle and the buts are at the top, no problem, we have a kit for you  – # 605047-C or 605047-D call us @ 855.668.0541 if you have any questions.**

EVERYTHING is made from steel…1/4″ plate, US steel and fully welded…nothing sucks like having something break because someone wanted to save a little time and not fully weld a part…these same parts get used on emergency vehicles so we don’t cut any corners to save any money, we just make it with the best steel and the best parts we can.

Every Truxxx leveling kit is Made using Canadian or USA Mill Certified Steel and laser cut to precision tolerances using OEM drawings…We cut no corners and only use the best steel we can buy – by using DOM tubing you can be sure we are making this kit Ram Tough!

Each kit is welded using the latest US Made welders and triple checked to ensure proper fitment.

• Designed to retain the stock ride quality! • Aftermarket shocks are NOT required! • Alignment specs included! •