1994-2001 Ram 1500 4×4 ~ 2″ Front and 2″ Rear Lift #605035-D

Description

This Kit Fits all engines, models and trim levels of:

1994-2001 Dodge Ram 1500 4×4

This Truxxx 2″ front and 2″ rear ALL STEEL (yes 100% real steel, not rubber or plastic or wood like some other kits on the market) lift for all versions of the 1994-2001 Dodge Ram 1500 4×4 pickups.

If you have a straight axle, coil spring Dodge 4×4 with the shock inside the spring made before 2013, this is your kit….yes, it works on the 1500 – it just has to be a 4×4 for all of these applications 

This Truxxx kit is easy to install and has NO CHANGE in OEM ride quality. We designed our kit to use OEM springs because we like the way the Ram drives, we like it’s qualities as a daily driver and we like that all of the important steering and suspension parts are all designed to work with the OEM springs…So while we like what the Ram drives like, we just need more ground clearance to fit those 35’s that make our work week and weekend adventures the best they can be. Ground clearance is increased over stock and allows for up to 34″ tall tires on an OEM offset style aftermarket rim.

All of our Ram leveling kits are a direct bolt in, 100% Made with USA and Canadian Mill Certified Steel and laser cut to precision tolerances using OEM drawings. This kit works with all original equipment shocks and struts.

We make this kit for ALL chassis that have the shock “INSIDE” the front spring, the rear u-bolts are 9/16″ ( unsure? it is the u-bolts that have the nuts facing upwards) and this kit comes with a 2″ rear block.

EVERYTHING is made from steel…1/4″ plate, US steel and fully welded…nothing sucks like having something break because someone wanted to save a little time and not fully weld a part…these same parts get used on emergency vehicles so we don’t cut any corners to save any money, we just make it with the best steel and the best parts we can.

These kits retain the stock ride quality of your truck. Every Truxxx 2” lift kit is Made using Canadian and USA Mill Certified Steel and laser cut to precision tolerances using OEM drawings. Each kit is welded using the latest US Made welders and triple checked to ensure proper fitment. Each kit contains two front spring spacers, all the required hardware, detailed instructions and complete alignment specs Recommended installation time is approx 4 hours + alignment and a 35” tall tire is commonly used on a stock style offset wheel.

• Designed to retain the stock ride quality! • Aftermarket shocks are NOT required! • Alignment specs included! •